Trenches in the construction industry
A trench is a hollow cut into the ground, usually with parallel sides and which is typically deeper than it is wide. Trenches were used in the First World War as a means of conducting combat as they offered a degree of protection and cover from enemy fire.
In construction, trenches are typically excavated for:
- Laying or getting access to services.
- Constructing foundations such as strip foundations. For more information see: Strip foundation.
Trenches may be dug manually or by mechanical excavators, with spoil typically loaded onto dump trucks to be taken for disposal, or re-used elsewhere on site. They need to be constructed with care and must be adequately supported to prevent the sides from caving in, thereby causing a hazard to life, as well as resulting in unnecessary costs and delays to the project.
For shallow trenches in firm ground, open timbering is usually used – whether made of timber or steel trench struts – in conjunction with poling boards. For softer ground, the number of poling boards is increased and they are arranged at closer intervals. Where the trench is deeper than 1.8m, or in loose soil, the sides are usually close-boarded.
In deep trenches, especially where they are likely to be left open for any length of time, the pressures exerted by the trench sides onto the boarding are often considerable and there is the possibility of the sides caving in if not adequately supported. They may also fill with water following heavy rain which may cause structural problems and require a pump to evacuate the water.
For more information see: Trench support and Dewatering.
[edit] Diaphragm walls
The construction of diaphragm walls often requires relatively narrow trenches to be cut – typically 500mm – 1,000mm wide and to depths of 50m and more. Excavation is typically undertaken using rope-suspended mechanical or hydraulically-operated grabs.
Preventing such deep, narrow trenches from caving in would be difficult using physical means such as struts and sheeting. Therefore, to provide support (before placing reinforcement and pouring the concrete) a bentonite slurry is poured into the trench. The slurry has thixotropic properties which means it is load bearing and so keeps the trench sides from collapsing. As the concrete is piped into the bottom of the trench, the bentonite is gradually displaced.
For more information see: Diaphragm wall.
Trenches are often termed temporary works as they are only required for a portion of the construction process.
For more information see: Temporary works.
[edit] Related articles on Designing Buildings Wiki
Featured articles and news
Homes England creates largest housing-led site in the North
Successful, 34 hectare land acquisition with the residential allocation now completed.
Scottish apprenticeship training proposals
General support although better accountability and transparency is sought.
The history of building regulations
A story of belated action in response to crisis.
Moisture, fire safety and emerging trends in living walls
How wet is your wall?
Current policy explained and newly published consultation by the UK and Welsh Governments.
British architecture 1919–39. Book review.
Conservation of listed prefabs in Moseley.
Energy industry calls for urgent reform.
Heritage staff wellbeing at work survey.
A five minute introduction.
50th Golden anniversary ECA Edmundson apprentice award
Showcasing the very best electrotechnical and engineering services for half a century.
Welsh government consults on HRBs and reg changes
Seeking feedback on a new regulatory regime and a broad range of issues.
CIOB Client Guide (2nd edition) March 2025
Free download covering statutory dutyholder roles under the Building Safety Act and much more.
Minister quizzed, as responsibility transfers to MHCLG and BSR publishes new building control guidance.
UK environmental regulations reform 2025
Amid wider new approaches to ensure regulators and regulation support growth.
BSRIA Statutory Compliance Inspection Checklist
BG80/2025 now significantly updated to include requirements related to important changes in legislation.